Jeanneau Sun Fast 3300

£189,450.00

TAX Paid

Swanwick, GB

Jeanneau Sun Fast 3300

Key Information

LOA

34.42 ft

Beam

11.08 ft

Draft

6.5 ft

Engine Fuel

diesel

Engine Type

Inboard

The Sun Fast 3300 built by Jeanneau, is a Verdier/Andrieu designed rocket ship full of advanced and unique features. Verdier has designed some of the world’s fastest Mini 650’s, Class 40’s and IMOCA 60’s and Andrieu has a string of successful IRC & IOR race boats to his name. Between them they have designed a blisteringly fast, competitive IRC short-handed racer/cruiser which already has an enviable race record. Give the 3300 some wind and she’s off like a scolded cat!!

“BUG” has a very special spec with many custom features and is ready to hit the race track with a high modulus carbon rig, custom water ballast system, North 3Di RAW Sails, B&G H5000 electronics and much more.

“BUG” has been dry sailed from new and is ready to go for a 2025 Fastnet Campaign.

Yacht Information

Name: BUG - Hull No. 049
Boat: Sun Fast 3300
Builder: Jeanneau
Year: 2021
Designer: Guillaume Verdier / Daniel Andrieu
Engine: Yanmar 2YM15
Location: Universal Marina, near Southampton
2024 Endorsed IRC rating is 1.032 with water ballast, 3 jibs and 4 spinnakers. There is an opportunity to optimize this significantly downwards with a Secondary Rating without water ballast, 2 jibs and 3 spinnakers for those who enjoy playing Rating Games.
STIX Stability No, is 38 which easily gets the boat Category A and OSR Cat 1 capabilitities.

Engine

Yanmar 2YM15 - 15hp inboard diesel engine
Shaft drive
Engine throttle in cockpit with removable handle
Engine panel in cockpit
125AH alternator
2 blade folding GORI racing propeller
50L Roto-moulded fuel tank on centreline
Removable GRP companionway & side hatches for easy access to engine
Fuel gauge

Construction

HULL: Infused GRP sandwich with balsa core. Infused structural liner glued into place
DECK: Infused GRP sandwich with foam core
BULKHEADS: Infused GRP sandwich moulded companionway, mast and forward bulkheads
STEERING: Twin polyester rudders with stainless steel rudder stock. Self-aligning rudder bearings. Composite tiller with tiller extension. GRP support for autopilot ram

Mast and Rigging

Axxon H40 Very High Modulus custom Carbon mast - deck stepped, twin adjustable spreaders. This mast is lighter and more adjustable than the standard 3300 carbon mast.
Rod rigging in lieu of wire
Axxon carbon boom
Custom carbon bowsprit made by Andy Barker in Cowes + running rigging for asymmetric & Code sails
Textile adjustable backstays with fine tune & return to primary winches
Runner blocks have protective pads and can be held forward in light airs.
All the running rigging is high-tech dyneema from Kingfisher Ropes custom made for this boat and using Tylaska shackles.
2 x Genoa halyards
1 x Mainsail halyard
2 x Masthead spinnaker halyards (one of which converts to Fractional halyard)
2 x Genoa sheets + In-haulers + down-haulers
2 x Spinnaker sheets
2 x Runner retrieval lines
1 x Mainsheet with coarse and fine tune
1 x Double ended mainsheet traveller line
1 x Multi-purchase mainsail outhaul
2 x Mainsail reefing lines
Barton boom vang
Cunningham system
Mainsail Dyneema reefing strops
Tack points of both Genoa and Spinnaker staysails
Bowsprit customized to take two tack lines - 1: 1 and 2:1

Deck Hardware

Stainless steel World Sailing compliant pushpits, pulpit, stanchions and wire guardrails
Mooring cleats forward and aft
Moulded toe rail, WS compliant, and comfortable for crew hiking
Full length mainsail traveller across cockpit floor
4 x Harken Performa winches (upgraded from factory standard)
Harken and Spinlock deck gear - jammers, clutches, fairleads - with many additions over and above the standard spec.
Dedicated sunken liferaft stowage area
Central trimming pedestal
Adjustable foot rack for helm
Ceramic cam upgrades on some of the rope clutches
Custom "Racetec Rigging" rope bags in cockpit
Mainsail cover
Mooring kit - fenders & warps
Anchor kit
Jackstays on side decks
Hatch retaining strap for Cat 2 regs
Fourth Cape custom Weed Bar for cleaning rudders

North Sails - all new in 2021 and in good condition

Mainsail 3Di with 3 reefs - new in Autumn 2022
AP Helix Jib 3Di RAW 780 12,600 Dpi
J4 heavy weather jib from Doyle in 2024
Heavy Jib c/w reef 3Di RAW 360 16,800 Dpi
J0 (75% smg) NPL Code Xi04 Helix TD
MHO (75% smg) NPL Code Xi04 Helix TD
FRO (75% smg) 3Di
A1 Asymmetric SuperKote SK 60/50
A2+ Asymmetric SuperKote SK 90/130
AP Staysail NPL Code Xi04 Helix
Storm Trysail Polyester High Visibility 8oz Storm Orange
GS / Storm Jib 3Di OCEAN 330 (NORDAC) 10,850 Dpi
C-Tech Carbon fibre luff receptacle, 3.6mm shell, 5.5mm insert for 85mm bat - for mainsail
Furlers for MHO and Staysails
All the jibs are on hanks

Electronics

Electrical distribution panel
12v and USB charge points at chart table
Expert Pro battery monitor
1 x 16AH Odyssey high cranking lightweight engine start battery
200AH Lithium battery - more usable charge & faster charging than lead acid batteries - fitted in 2022
Complete B&G H5000 system with Hercules upgrade
2 x Zeus3 9" MFD's mounted in cockpit
1 x Nemesis display on mast bracket
1 x 20/20 HV displays on mast bracket
v60 VHF with DSC + remote handset
NAIS 500 transceiver (includes GPS, antenna splitter)
VMHU wind sensor (Vertical Mast Head Unit)
Hawk Windex
Backbone cables, connectors etc
Type 2 short stroke linear drive autopilot ram
Gyro + Precision 9 compass + H5000 Motion Sensor
RF25N rudder reference unit
WR10 remote control pad for Pilot
Piot control pad & H5000 Graphic MFD at both helm stations
GoFree WiFi module
Electronic barometer

Tricolour masthead LED light
LED strip light for sail trimming on front of mast
Deck level LED navigation lights (World Sailing safety regs compliant)
Navigation magnetic compass

Galley

Large galley to port
Storage with countertop
Stainless steel sink
Pressurised cold water tap
Storage for flatware
Jet Boil gimballing gas stove
Original 2 burner gas hob available loose (in storage)
40L Cool box
100L Freshwater flexi-tank under saloon berth - removed but available

Safety Gear (service dates not checked)

Jackstays in cockpit and on side decks
Deck level emergency LED navigation lights
Jonbouy
Danbouy
Horseshoe lifebouy + light + drogue
Heaving line
Flare pack
Cockpit knife
EPIRB 406MHz
Further equipment not listed

Miscellaneous

Straight IRC optimised keel, mixed lead/iron with epoxy surface treatment
One Touch winch handles
Flush fit through hull seacocks
Electric bilge pump
Manual bilge pump
Additional internal manual bilge pump for Cat.2 Regs
Adjustable lee cloths in saloon
Adjustable canting bunk supports in aft cabins
IRC optimised saloon table
Shipping / Storage cradle with hull former supports
Hanging zinc anode
Fourth Cape custom E-Bar electronic rudder toe angle adjuster system + dedicated display (also displays on B&G MFD's).
Cyclops Smartune forestay load cell
Custom water ballast system - 260kg (standard is 200kg), with Sofos Scoops, transfer valves and dump valves making this more efficient than the standard offering.

Manufacturer Provided Description

Manufacturer Provided DescriptionThe Sun Fast 3300 is the brain child of Guillaume Verdier and Daniel Andrieu, whose collaboration guarantees high performance and success under a variety of rating rules. Taking advantage of Jeanneau’s long history of infusion manufacturing, every part of the 3300 is infusion moulded, dramatically reducing the all-up weight of the boat while increasing stiffness. Combining the light hull with twin rudders, carbon rig, generous sail plan and straight keel, the 3300 will excel as an offshore racer. Sailing fully crewed, double, or single handed, the Sun Fast is a truly exhilarating boat, not to be missed.

Disclaimer

DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. It is not guaranteed that the safety gear listed on the specification comes within the manufacturer's safety guidelines i.e. expiry dates and servicing and is therefore sold as is.